Single pump - Single Rigged - Package Sewage Pumping Station in the following tank sizes, 1600L-2400L-2800L-3300L-2600L-3500L-4400L-5200L
A packaged pump station is used when gravity drainage on site cannot be achieved and particularly suitable when water or sewage is collected lower than the main sewer or a septic tank system.
The waste from the site flows into an underground storage chamber, where it is then pumped to the main sewer. Packaged pump stations can be used for both foul water (sewage) and surface water applications, all are designed to be installed with ease.
The Single Rigged 1600L to 5200L is a compact sewage pump station suitable for small to large houses and also commercial applications.
All you need is supplied to you within the package, so you will only need to supply the pipework to and from the station, plus any fittings.
A high water alarm is available if required. The Pumping Station comes with a submersible pump with 50mm solid handling for peace of mind. Our range of pumping stations is of a superior design and quality, to meet with BSEN75.6 requirements.
Pump:
Cast iron/stainless steel construction
50mm (2") solids handling capacity
Coolant filled motor
Mechanical seal
10 M cable
Max 6 M lift
Max flow 5 L/sec
Float switch as standard
1 x 10M float controls
1 x float bracket
Optional Extra: High level alarm
Maxi Single Sewage Pump Station - 8m Head - 65mm Vortex
Tank:
Polyethylene tank
Dim: 1.0M² x 1.0M D/1.0M² x 1.5M D/
1.0M x 2.0M D
Capacity 1600L-5200L
1 x 110mm/160mm inlet seal to allow inlet to be drilled on site
40mm cable duct
2" internal pipe work
2" non-return valve
2" quick release coupling
2" cable duct
Special audible/visual high level alarm control box available
CONTACT US ON 0333 335 5137 TO FIND OUT ABOUT OUR PUMP STATION INSTALLATION SERVICES!